The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Other CAD Tools >> Entry Tools >> EDIF In Error
https://designers-guide.org/forum/YaBB.pl?num=1304488903

Message started by ywguo on May 3^rd, 2011, 11:01pm

Title: EDIF In Error
Post by ywguo on May 3^rd, 2011, 11:01pm

Hi Guys,

I jumped into a problem when I tried to import an EDIF 200 file for Virtuoso symbol view. The log file edifin.log is shown below.

Quote:

error at line :1 between '' and ''
Unexpected character "/" in input
error on line 1: between '' and ''
syntax error
Translation complete.
There were 0 warning messages and 2 errors in the design

The following is the head of the imported EDIF file.

Quote:

/* Edif file name is "CADENCE_EDIF" */

/* EDIF version: 2 0 0 */

library("library_name") {
SCALE = 1.0 / 10.0;
ROUTE_GRID = 1024;
set_route_grid(ROUTE_GRID);
set_meter_scale(0.0254 / (160 * SCALE * ROUTE_GRID));
symbol ("AD1HSV1") {
set_minimum_boundary (0 * SCALE, 0 * SCALE, 140 * SCALE, 140 * SCALE);

Software version is Virtuoso IC6.1.5.500.1.

Can you help me figure it out? Thank you.

Yawei

Title: Re: EDIF In Error
Post by ljlu on Mar 6^th, 2012, 12:33am

I encountered the same question. If you've solved it, tell me. Thanks!