The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Other CAD Tools >> Physical Verification, Extraction and Analysis >> Assura: finding nets in layout
https://designers-guide.org/forum/YaBB.pl?num=1308657455

Message started by rho on Jun 21^st, 2011, 4:57am

Title: Assura: finding nets in layout
Post by rho on Jun 21^st, 2011, 4:57am

Is there a way to high-light a certain node in the layout after a successful Assura LVS run?
Ex. : I run an LVS on a layout and I know it contains a net XYX because it's in the schematic. Now I want to know were this specific net is in the layout.

Is there an easy way to do this?

Title: Re: Assura: finding nets in layout
Post by bernd on Jun 21^st, 2011, 5:11am

This is possible with the Assura LVS Debug environment.
Design Window: Assura -> LVS Debug Env...
LVS Debug Env: Tools->Probe

*

Title: Re: Assura: finding nets in layout
Post by rho on Jun 21^st, 2011, 5:29am

Works like a charm! Thanks.
I tried it before, but it seems I used the wrong syntax. At least you confirmed that it should work, and it does. :)