The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Simulators >> AMS Simulators >> AMS-ADE multiple sdf command files
https://designers-guide.org/forum/YaBB.pl?num=1316506841

Message started by Kamal on Sep 20^th, 2011, 1:20am

Title: AMS-ADE multiple sdf command files
Post by Kamal on Sep 20^th, 2011, 1:20am

Hi All,

I am running mixed-signal simulation and in my design I have 3 digital blocks.

For each digital block I have a .sdf file, a .sdf.X file & a .cmd file.
In AMS-ADE=>Simulation=>Options=>Compiler=>Use sdf command file I can put the sdf command file for one digital block.

How can I proceed to select the 3 sdf command files during the simulation?

Title: Re: AMS-ADE multiple sdf command files
Post by boe on Sep 20^th, 2011, 3:12am

Kamal,
An SDF command file can consist of several sections to annotate different portions of your design. See documantation.

B O E

Title: Re: AMS-ADE multiple sdf command files
Post by Kamal on Sep 22^nd, 2011, 6:18am

I finally copied the 3 sdf command files in one sdf command file, each separated by a ";" and it works :).

Kamal