The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Simulators >> Circuit Simulators >> Temperature sweep in AMS transient simulation
https://designers-guide.org/forum/YaBB.pl?num=1317946248

Message started by sutapanaki on Oct 6^th, 2011, 5:10pm

Title: Temperature sweep in AMS transient simulation
Post by sutapanaki on Oct 6^th, 2011, 5:10pm

Hi,

I'm doing transient simulation in AMS (with APS as solver) in Cadence ADEL - most of the circuit is transistor level but there is also a big AMS control block. The circuit I'm simulating is a switched capacitor design so I need to use transient simulation. For a particular test I want to sweep temperature to check the offset drift. Any idea how to perform a temperature sweep from within transient simulation ?

Thanks

Title: Re: Temperature sweep in AMS transient simulation
Post by boe on Oct 7^th, 2011, 1:30am

sutapanaki,
See post http://www.designers-guide.org/Forum/YaBB.pl?num=1275773203. Please note forum guidelines http://www.designers-guide.org/Forum/guidelines.html.
B O E

Title: Re: Temperature sweep in AMS transient simulation
Post by sutapanaki on Oct 7^th, 2011, 12:05pm

Thanks Boe. Sorry for redundant posting, I did search but forgot to ask to search all posts not only the ones from last week.