The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Simulators >> Circuit Simulators >> How to save and plot intrinsic parameters of MOSFETs modeled by Verilog-A
https://designers-guide.org/forum/YaBB.pl?num=1332471665

Message started by Tapas Kumar Maiti on Mar 22^nd, 2012, 8:01pm

Title: How to save and plot intrinsic parameters of MOSFETs modeled by Verilog-A
Post by Tapas Kumar Maiti on Mar 22^nd, 2012, 8:01pm

Hi,

I modeled a MOSFET using Verilog-A codes and compiled my codes using HSPICE.

In my model I introduced potential (V), charge(q) equations. I want to plot V/q vs. Vgs graph and want to save the simulated data and also intrinsic device parameters.

Can you please explain how I can do it by Verilog-A

Best regards,
Tapas

Title: Re: How to save and plot intrinsic parameters of MOSFETs modeled by Verilog-A
Post by Forum Administrator on Mar 22^nd, 2012, 10:27pm

Verilog-A, being a modeling language, has nothing to do with plotting. I think the question you should be asking is how do you do this with HSPICE.

Unfortunately, never having used HSPICE I do not know the answer to that. But now that you know it is an HSPICE question, perhaps you might want to read your HSPICE manual.

-Ken