The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Simulators >> AMS Simulators >> Standard Cell Libraries in AMS
https://designers-guide.org/forum/YaBB.pl?num=1336559413

Message started by mtp3 on May 9^th, 2012, 3:30am

Title: Standard Cell Libraries in AMS
Post by mtp3 on May 9^th, 2012, 3:30am

Hi!

I am pretty new to the AMS setup and all so please bear with me. I am trying to setup a work environment for a mixed signal simulation. When I use a verilog description of the a block every thing works fine, but when I try to use a standard cell from the PDK (STM) in this case I get errors during design ellaboration. The exact error is

ncelab: *E,CUCFUN: instance 'U78' of the unit 'HS65_GL_IVX9' is unresolved in 'PllDco.fractional_logic:functional'.

I have extracted the standard cell library using the setup.ncverilog script in to an inca.lnxxxxx.pak file but I don't know how to include it in the simultion or use it.

Can someone please guide me how to solve this issue. I am using AMS from the config view in cadence IC6.15.

Title: Re: Standard Cell Libraries in AMS
Post by ywguo on May 16^th, 2012, 1:43am

Hi mtp3,

Please choose Simulation --> Options --> AMS Simulator ..., fill in Library files (-v) if you select OSS-based netlister in ADE.

Yawei