The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> Circuit Simulators >> Sigma-delta ADC: Matlab sims vs Spice sims. Odd harmonics https://designers-guide.org/forum/YaBB.pl?num=1337934202 Message started by hoss on May 25th, 2012, 1:23am |
Title: Sigma-delta ADC: Matlab sims vs Spice sims. Odd harmonics Post by hoss on May 25th, 2012, 1:23am Hello all, I am currently trying to design the analogue part of a 2nd-order sigma-delta ADC. My bandwidth is 1KHz and I need to achieve SNDR > 98dB (16bits). I have started with some Matlab-Simulink simulations base on the SigmaDelta Toolbox. The only non-desired effect I am considering so far is just the switch non-linearity and the KT/C noise. Both integrators are ideal and there is no saturation in the system. I have implemented the same system in my spice simulator. Ideal integrators and comparator. When simulating both systems under same conditions, I have found that the schematic simulation has odd harmonics, which are not visible with Simulink. These harmonics ruin my SNDR so results are different from expected. I have seen other people having the same issue as me but, I still don't know where these harmonics come from or how to reduce them. Even with ideal components, are odd-order harmonics a common issue in SD-ADCs? Thank you in advance to everyone providing some feedback. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |