The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Simulators >> AMS Simulators >> What is your choice of simulator for MS system of all-corners?
https://designers-guide.org/forum/YaBB.pl?num=1339502867

Message started by nieh on Jun 12^th, 2012, 5:07am

Title: What is your choice of simulator for MS system of all-corners?
Post by nieh on Jun 12^th, 2012, 5:07am

Hi guys;

I'm currently simulating a mixed-signal system design by AMS, with analog part drawed in cadence composer and digital in verilog;

When it comes to all-corner simulation, AMS is too time and license costly, so I attempt other simulator such as Finesim plus nc-verilog;

My question is what is your choice of simulator for MS system of all-corners concerning speed and accuracy (pll included)?

Is my combine a good alternative?

And is there any method to auto-gen spice-format netlist of mixed-signal system based on cadence environment as manually handle the netlist is very trivial and apt to mistake?

Cheers & BR

nieh

Title: Re: What is your choice of simulator for MS system of all-corners?
Post by nieh on Jun 13^th, 2012, 4:24am

Any comments are highly appreciated~

BR~

nieh