The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Design >> Mixed-Signal Design >> Protecting logic inputs and outputs that go to external connectors https://designers-guide.org/forum/YaBB.pl?num=1395399230 Message started by Northy on Mar 21st, 2014, 3:53am |
Title: Protecting logic inputs and outputs that go to external connectors Post by Northy on Mar 21st, 2014, 3:53am Hi, I have two boxes that I'd like to connect together so that when one triggers the other one triggers too. I've come up with the following circuit which I've prototyped and it seems to work well. The logic signals will end up going to a connector though, and I'm nervous about damage to the devices through over voltage connection and ESD etc. What sort of protection should I be looking at using to protect the devices? Thanks, G |
Title: Re: Protecting logic inputs and outputs that go to external connectors Post by loose-electron on Mar 26th, 2014, 11:34am http://electronicdesign.com/power/protect-your-fortress-esd Give that a read. I hear that this guy really know his stuff! :) ;) |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |