The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Design >> Analog Design >> capacitive voltage divider circuit query https://designers-guide.org/forum/YaBB.pl?num=1399820086 Message started by eternity on May 11th, 2014, 7:54am |
Title: capacitive voltage divider circuit query Post by eternity on May 11th, 2014, 7:54am Hi, I have a small doubt regarding capacitive voltage divider(2 capacitors in series) circuit. Will the votlage gets divided by half in the middle arm if I supply a voltage source in the top end of top capacitor? Theoretically, it should be possible but I am not able to see that happening in the CAD tool I am using. I am not sure whats happening. Can anyone here help me out Eternity |
Title: Re: capacitive voltage divider circuit query Post by loose-electron on May 11th, 2014, 9:54am You need to have a DC path to the center node. Without that it will not simulate easily. |
Title: Re: capacitive voltage divider circuit query Post by eternity on May 11th, 2014, 12:31pm I figured out the issue through your help. Thanks. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |