The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Design >> Mixed-Signal Design >> Process only, Mismatch only, or 'All'
https://designers-guide.org/forum/YaBB.pl?num=1404636934

Message started by jockeymonto on Jul 6^th, 2014, 1:55am

Title: Process only, Mismatch only, or 'All'
Post by jockeymonto on Jul 6^th, 2014, 1:55am

Hi,

I need to know when to run process only, mismatch only and 'all' option in MC simulations. It certainly depends on the type of circuit but how do we know which type of circuit is more prone to process or mismatch. I believe DAC capacitive arrays, and current mirrors are certainly sensitive to mismatch but when should we run 'all' option and the 'process' option?

Title: Re: Process only, Mismatch only, or 'All'
Post by loose-electron on Jul 6^th, 2014, 3:59pm

depends on what you are trying to do. If I was working on offsets, I might run just the mismmatch only.