The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Modeling >> Semiconductor Devices >> Charge pump design https://designers-guide.org/forum/YaBB.pl?num=1408190998 Message started by farsheed on Aug 16th, 2014, 5:09am |
Title: Charge pump design Post by farsheed on Aug 16th, 2014, 5:09am Hi, I am designing a charge pump circuit with thin oxide transistors with supply voltage 1.2 V, But, I am getting almost double output if I design the charge pump with thick-oxide transistors than the design with thin-oxide transistors. My question is why this thing happen? and which transistor model is ideal for designing a charge pump circuit to work for a high voltage generator. And for an EEPROM how much high voltage is required for the write operation. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |