The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Other CAD Tools >> Physical Verification, Extraction and Analysis >> EM Simulation
https://designers-guide.org/forum/YaBB.pl?num=1408625668

Message started by AZADBAKHT on Aug 21^st, 2014, 5:54am

Title: EM Simulation
Post by AZADBAKHT on Aug 21^st, 2014, 5:54am

Hi All
i need to EM Simulation software for analyze inductor for OSC in CMOS-90nm technology.
really i need to free download.
i downloaded the sonnet software but this software has been cmos-180nm Tech.!!
can anyone help me and give me a address for download EM simulation?l

Title: Re: EM Simulation
Post by aaron_do on Aug 21^st, 2014, 8:23am

Hi,

as far as the characteristics of the inductor are concerned, the important part is knowing the conductor thickness and material and how high above the substrate it is. I don't think the other details will have too much effect.

regards,
Aaron

Title: Re: EM Simulation
Post by AZADBAKHT on Aug 21^st, 2014, 11:03pm

Hi

ok so can i use the sonnet software with gpdk180nm?
but i need to knowing the three characteristic cited of you.

Regards
Mostafa

Title: Re: EM Simulation
Post by irisaru on Sep 17^th, 2014, 6:33am

Hi,

I think you can find these characteristic inside PDK documents, it usually shows how high the substrate, the metal thickness, resistance sheet,...

Thanks,
Irisaru