The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Simulators >> AMS Simulators >> MONTE CARLO ANALYSIS IN CADENCE
https://designers-guide.org/forum/YaBB.pl?num=1409139088

Message started by Mir on Aug 27^th, 2014, 4:31am

Title: MONTE CARLO ANALYSIS IN CADENCE
Post by Mir on Aug 27^th, 2014, 4:31am

hii..
is it possible to do monte carlo analysis in cadence for UMC 180nm technology....as i heard there r some model files missing...

NOw i tried t o do the monte carlo analysis in 90nm.. i am facing an error..

1. Monte carlo run stopped because no statistical data generated for the test

2. Attempt to run Monte Carlo analysis with mismatch variations, but no mismatch variations were specified in the statistics block.

Title: Re: MONTE CARLO ANALYSIS IN CADENCE
Post by Geoffrey_Coram on Mar 26^th, 2015, 6:58am

Mir wrote on Aug 27^th, 2014, 4:31am:

2. Attempt to run Monte Carlo analysis with mismatch variations, but no mismatch variations were specified in the statistics block.

You need to take up this issue with the foundry that provided the models. They have access to all the wafers they need, and generally this information is proprietary (how well they control the variation is competitive information).

Title: Re: MONTE CARLO ANALYSIS IN CADENCE
Post by Mir on Mar 26^th, 2015, 9:52am

Thanks dear...I sorted it out....some files were missing!!! :)