The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Simulators >> Circuit Simulators >> Monte Carlo Analysis Histogram
https://designers-guide.org/forum/YaBB.pl?num=1413225272

Message started by zulqar on Oct 13^th, 2014, 11:34am

Title: Monte Carlo Analysis Histogram
Post by zulqar on Oct 13^th, 2014, 11:34am

Hi All,
I am designing a current conveyor and I am doing Monte Carlo Analysis(by varying width and length of transistor) for Current gain , voltage gain and Rx,Ry & Rz. I am using code as given below:
Vdd 5 0 2.5
Vss 20 0 -2.5
Ib 0 2 100u
vin 7 0 ac 1 sin (0 100m 100kHz)
.print V(8)
.ac dec 10 10 100g sweep monte=30
.tf v(8) vin
M1....
M2....
.end
Here v(8)/vin is voltage gain(beta) .I want to print its value for each iteration and then plot its histogram around mean value of unity . How can I do that ?
If anybody could give some suggestion regarding this , I will be thankful.
Thanks

Title: Re: Monte Carlo Analysis Histogram
Post by raja.cedt on Oct 13^th, 2014, 1:12pm

which simulator you have???

Title: Re: Monte Carlo Analysis Histogram
Post by zulqar on Oct 13^th, 2014, 10:13pm

I am using synopsys HSPICE.

Title: Re: Monte Carlo Analysis Histogram
Post by zulqar on Oct 22^nd, 2014, 11:39am

I am attaching plot of voltage gain (beta) . If anybody could help me in plotting its histogram , I will be very much thankful .