The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> Logic Simulators >> OSSHNL ERROR 514 and 287 https://designers-guide.org/forum/YaBB.pl?num=1415084840 Message started by peteK on Nov 3rd, 2014, 11:07pm |
Title: OSSHNL ERROR 514 and 287 Post by peteK on Nov 3rd, 2014, 11:07pm Hi, I am designing a datapath circuit, but I am having trouble with cadence software virtuoso & My circuit can't netlist, but sometimes it does netlist after a few hours, even if nothing got changed in between. Sometimes i select 'escape names', and it netlists, other times it doesn't even if i select it or delete the run folder. Netlisting has completely become random for me, yet it was working fine a week ago, the errors below are the ones output when it fails(see attached or follow site given); http://oi58.tinypic.com/261nqza.jpg |
Title: Re: OSSHNL ERROR 514 and 287 Post by boe on Nov 4th, 2014, 4:54am Pete K, so what is your question? Did you try suggestion 3? - B O E |
Title: Re: OSSHNL ERROR 514 and 287 Post by peteK on Nov 4th, 2014, 8:57pm what is suggestion3? am new to this site, but i only see one post here boe wrote on Nov 4th, 2014, 4:54am:
|
Title: Re: OSSHNL ERROR 514 and 287 Post by peteK on Nov 4th, 2014, 8:59pm oh, i get it. am going to try chaging it and see what happens, someone told me its in simrc. peteK wrote on Nov 4th, 2014, 8:57pm:
|
Title: Re: OSSHNL ERROR 514 and 287 Post by peteK on Nov 5th, 2014, 10:13pm it worked, i changed the max to 50. thanks |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |