The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Simulators >> Circuit Simulators >> Is there any way to combine WaveView and Cadence ADE together
https://designers-guide.org/forum/YaBB.pl?num=1425348032

Message started by refugee on Mar 2^nd, 2015, 6:00pm

Title: Is there any way to combine WaveView and Cadence ADE together
Post by refugee on Mar 2^nd, 2015, 6:00pm

Dear all,
Is there any way to combine WaveView and Cadence ADE together?
The follow is my workflow:
1. use cadence ade to generate hspice netlist
2. use hsipce to simulate
3. use waveview to check the simulation results

when the simulation file is big, it's suffering to wait for the results. And when I print the waveform by choosing the netlist name in SX, it's not very straight forward. So, is there any script or tools can get the follow target:
1. Use Print in ADE to print the node in schematic and press ESC (Just like print waveform in cadence enviroment)
2. Show the waveforms in waveview