The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Modeling >> Semiconductor Devices >> Implementation and Discussion: BSIM3 CV Parameter Extraction https://designers-guide.org/forum/YaBB.pl?num=1437149470 Message started by ohenri100 on Jul 17th, 2015, 9:11am |
Title: Implementation and Discussion: BSIM3 CV Parameter Extraction Post by ohenri100 on Jul 17th, 2015, 9:11am Hi all, I'm working to extraction the BSIM3v3 CV Parameter. I create this topic to sharing, discussion, studying for new man. (I'm a new man) :P My task: Extract all CV parameters in BSIM3v3 Model using Levenberg-Marquardt Algorithm. I study the Flow for Extraction but it is very hard for new man; Therefore, I do it step by step: Step 1. Extraction TOX from Cgg - Vgs curve. Result: Step 2. Extract Vth for CV Hidden. Step 3. Extract: DLC, CF, CGSO, CGSL, C_KAPPA from Overlap Cap Cgs vs. Vgs . Result: In this step 3, as flow we need to extract DLC and CF. My post and my work are stop this here. I need every share your experience, your advice,... about this method and this flow. I hope they have good stuff for them next post. I need and I want to discuss to improve my work. Thank you. |
Title: Demo: Implementation and Discussion: BSIM3 CV Parameter Extraction Post by ohenri100 on Oct 21st, 2015, 12:34am Dear all I show a demo full BSIM3v3 Capacitance extraction in my work. Regard. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |