The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Simulators >> Circuit Simulators >> STB phase start with 0 degree
https://designers-guide.org/forum/YaBB.pl?num=1439542463

Message started by newic on Aug 14^th, 2015, 1:54am

Title: STB phase start with 0 degree
Post by newic on Aug 14^th, 2015, 1:54am

Hi

I am designing a classical folded cascode classAB opamp. The STB result of the phase looks strange as the phase started with 0 degree instead of 180o in the usual case.

Title: Re: STB phase start with 0 degree
Post by Frank Wiedmann on Aug 17^th, 2015, 4:55am

You might want to take a look at http://www.designers-guide.org/Forum/YaBB.pl?num=1294178255.