The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Other CAD Tools >> Physical Verification, Extraction and Analysis >> PIN order in extracted netlist from Calibre PEX
https://designers-guide.org/forum/YaBB.pl?num=1449695213

Message started by SATurn on Dec 9^th, 2015, 1:06pm

Title: PIN order in extracted netlist from Calibre PEX
Post by SATurn on Dec 9^th, 2015, 1:06pm

Problem:
How to ask Calibre Pex to produce extracted netlist with proper pin order to be used directly by spectre

Condition:
I am using command line Calibre to extract netlist from GDS.

I'll appreciate your help.

SATurn