The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Simulators >> AMS Simulators >> ncelab no connection module found
https://designers-guide.org/forum/YaBB.pl?num=1453299264

Message started by JayM06 on Jan 20^th, 2016, 6:14am

Title: ncelab no connection module found
Post by JayM06 on Jan 20^th, 2016, 6:14am

Hi guys,

So i'm quiet new to the verilog ams but it has been over 2 weeks that i'm working on it. I read all the posts before coming here, several docs on cadence and some literature.
Anyway i have a problem with the connection between an analog module (resistance) and a digital one (clock generator). Both these modules were taken on this page's tutorial on verilogAMS.

ncelab: *E,CUVNCM (./test_res.vams,12|35): No connection module found:Need an input port of discrete discipline logic, and an output port of continuous discipline electrical, at instance top.clock_gen1.

i already checked the libraries and i do have the connetLib. The automatic insertion isn't working based on the error.

Please help i have no more ideas

Thank you for your replies

Title: Re: ncelab no connection module found
Post by AMS_ei on May 23^rd, 2016, 11:36pm

It is looking for L2E connect module. What is the default discipline that you have set?

Title: Re: ncelab no connection module found
Post by AMS_ei on May 23^rd, 2016, 11:38pm

what is the code in line no. 12 of that file?