The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Simulators >> Circuit Simulators >> Plotting I-V curve in spice or verilog
https://designers-guide.org/forum/YaBB.pl?num=1459233812

Message started by gold on Mar 28^th, 2016, 11:43pm

Title: Plotting I-V curve in spice or verilog
Post by gold on Mar 28^th, 2016, 11:43pm

Hai,

I need to plot Id curve Vs Vg1 for various Vg2 values using verilog coding (or spice code).
Pls suggest me.

Title: Re: Plotting I-V curve in spice or verilog
Post by Geoffrey_Coram on Apr 4^th, 2016, 8:40am

Verilog is a hardware description language, it's not a waveform viewer/plotter.

In Spice, one can set up simulations (and I think there's a way to define nested sweeps, but I forget the syntax in Spice 3f5, and it's a different syntax depending on exactly which Spice-like simulator you're using). Do you have .alter in your simulator?