The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> RF Simulators >> how to simulate vco with injection locking https://designers-guide.org/forum/YaBB.pl?num=1461420726 Message started by alialialialiali on Apr 23rd, 2016, 7:12am |
Title: how to simulate vco with injection locking Post by alialialialiali on Apr 23rd, 2016, 7:12am hi, how to simulate vco with injection locking and get output frequency and phase noise? what are simulation tools for calculating output frequency and phase noise? is there any example? |
Title: Re: how to simulate vco with injection locking Post by Forum Administrator on Apr 23rd, 2016, 7:09pm Specify tstab sufficiently large to get oscillator into lock, then run a 'driven' PSS/PNoise. Just as you would with a PLL. Please do not put simulation questions in the design boards. -Ken |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |