The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> Circuit Simulators >> Writing and Reading on different files based on Corners https://designers-guide.org/forum/YaBB.pl?num=1484806158 Message started by subtr on Jan 18th, 2017, 10:09pm |
Title: Writing and Reading on different files based on Corners Post by subtr on Jan 18th, 2017, 10:09pm Hi, This might not be a relevant post. But it would be great to know if anyone has ever written into a different files using verilogAMS based on the corner simulated in Cadence Virtuoso ADE/ADE XL. I have tried giving filename as variable and parameter in the vams. If anyone has tried this, it would be really great to know how. I would also want to know if reading from different files based on corner is possible as well. |
Title: Re: Writing and Reading on different files based on Corners Post by AMS_ei on Apr 25th, 2017, 9:32am Hi, You can create an OCEAN script and there you can use 'foreach' statement for PVT corners. Hope this is helpful. Thank you. Kind Regards. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |