The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> Circuit Simulators >> Cadence PSS Pnoise Analysis https://designers-guide.org/forum/YaBB.pl?num=1531988716 Message started by ashrafSazid on Jul 19th, 2018, 1:25am |
Title: Cadence PSS Pnoise Analysis Post by ashrafSazid on Jul 19th, 2018, 1:25am Hi, When I run pnoise analysis (with PSS first) from 1 to 100MHz it always stops at ~43.2 KHz. I am new at pnoise analysis. Is there any guidance that could help me? Thanks. |
Title: Re: Cadence PSS Pnoise Analysis Post by Geoffrey_Coram on Jul 19th, 2018, 8:29am Did you read through the log file or what it prints to the screen? Sometimes it stops because the PSS didn't take enough timepoints to resolve higher frequencies, and there's an option you can give to PSS to fix this. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |