The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Design >> Analog Design >> Anyone know how to make a usable +/- 20V Dual Power Supply from DC
https://designers-guide.org/forum/YaBB.pl?num=1540586960

Message started by z7d8tsg on Oct 26^th, 2018, 1:49pm

Title: Anyone know how to make a usable +/- 20V Dual Power Supply from DC
Post by z7d8tsg on Oct 26^th, 2018, 1:49pm

Hi Everyone,

I am trying to make this :

https://www.edaboard.com/showthread...-and-Gnd)-to-1-Mhz-square-wave-(-20v-and-20v)

Anyone know how I can make a +/- 20V Dual Power Supply to power the above link?

I have a wall charger that makes 64V 360mA LPS that I can use to start things off

Thanks

-Dan

Title: Re: Anyone know how to make a usable +/- 20V Dual Power Supply from DC
Post by z7d8tsg on Oct 27^th, 2018, 12:51pm

Anyone have any recommendations for an (IGBT Driver and IGBT Combo) or (Mosfet Driver and Mosfet Combo) that could do this? I cannot find an ideal combo...

Thanks