The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> Circuit Simulators >> Hurry, how to use the netlist-based/spice-based spectrerf simulation. https://designers-guide.org/forum/YaBB.pl?num=1582730069 Message started by Jacki on Feb 26th, 2020, 7:14am |
Title: Hurry, how to use the netlist-based/spice-based spectrerf simulation. Post by Jacki on Feb 26th, 2020, 7:14am Hi, We are spoiled too much by Cadence, now I have no idea how to use the netlist-based/spice-based solution to simulation VCO by using SpectreRF. All of the tutorials from internet is graphic solution, I wonder who can give me an example with the netlist simulation, or any tutorial of the SpectreRF syntax in the netlist? Appreciate very much. |
Title: Re: Hurry, how to use the netlist-based/spice-based spectrerf simulation. Post by Ken Kundert on Feb 27th, 2020, 12:34am See listing 1 in Simulating Switched-Capacitor Circuits with Spectre-RF. Or, if you are into Python and what to see an example of the whole process from generating the netlist, through simulating, to extracting and plotting the waveforms, see Flicker Noise -Ken |
Title: Re: Hurry, how to use the netlist-based/spice-based spectrerf simulation. Post by Frank Wiedmann on Feb 28th, 2020, 3:16am Hi Ken, I'm not sure why you changed the name of the voltage source from Vin to Vmod in runPnoise, but it breaks the simulation unless you also change the oprobe statements. Regards, Frank |
Title: Re: Hurry, how to use the netlist-based/spice-based spectrerf simulation. Post by Ken Kundert on Mar 2nd, 2020, 9:47pm No particular reason other than I think it makes it a bit more obvious what the purpose of the source is. I think I found the problem myself after a day or so and fixed it. Thanks for reporting it. -Ken |
Title: Re: Hurry, how to use the netlist-based/spice-based spectrerf simulation. Post by Frank Wiedmann on Mar 3rd, 2020, 2:37am The pnoise.scs file still has the problem (which is not a real issue because runPnoise overwrites it). |
Title: Re: Hurry, how to use the netlist-based/spice-based spectrerf simulation. Post by Ken Kundert on Mar 3rd, 2020, 3:17pm Whoops. Fixed now. Thanks Frank! |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |