Forum
Forum
Verilog-AMS
Analysis
Modeling
Design
Theory
Welcome, Guest. Please
Login
or
Register.
Please follow the Forum
guidelines
.
Apr 19
th
, 2024, 6:59pm
Home
Help
Search
Login
Register
PM to admin
The Designer's Guide Community Forum
›
Simulators
›
AMS Simulators
› help
‹
Previous topic
|
Next topic
›
Pages: 1
help (Read 4301 times)
jeffyan
Community Member
Offline
Posts: 47
help
Jan 24
th
, 2005, 6:59am
dear all:
where can i get a free verilog-A or verilog-AMS simulator for study?
thanks !
jeff.yan
Back to top
IP Logged
Paul
Community Fellow
Offline
Posts: 351
Switzerland
Re: help
Reply #1 -
Jan 28
th
, 2005, 3:19am
Hello Jeff,
searching this web site leads to the following post:
http://www.designers-guide.com/Forum/?board=vhdlams;action=display;num=108845606...
I'm not sure which of the mentioned tools support Verilog-AMS and are free at the same time. I think Smash should come up with Verilog-AMS support, but I don't know if it will be available in the free version.
Hope this helps
Paul
Back to top
IP Logged
Geoffrey_Coram
Senior Fellow
Offline
Posts: 1998
Massachusetts, USA
Re: help
Reply #2 -
Mar 7
th
, 2005, 6:01am
If you just want Verilog-A, there's a project called "ADMS" on sourceforge:
http://sourceforge.net/projects/mot-adms/
Back to top
If at first you do succeed, STOP, raise your standards, and stop wasting your time.
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent Posts
» 10 most recent Topics
Design
- RF Design
- Analog Design
- Mixed-Signal Design
- High-Speed I/O Design
- High-Power Design
- Mixed-Technology Design
Analog Verification
- Analog Functional Verification
- Analog Performance Verification
Measurements
- RF Measurements
- Phase Noise and Jitter Measurements
- Other Measurements
Modeling
- Semiconductor Devices
- Passive Devices
- Behavioral Models
- Transmission Lines and Other Distributed Devices
Design Languages
- Verilog-AMS
- VHDL-AMS
Simulators
- Circuit Simulators
- RF Simulators
»» AMS Simulators
- Timing Simulators
- System Simulators
- Logic Simulators
Other CAD Tools
- Entry Tools
- Physical Verification, Extraction and Analysis
- Unmet Needs in Analog CAD
General
- Tech Talk
- News
- Comments and Suggestions
- Opportunities
« Home
‹ Board
The Designer's Guide Community Forum
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.
Copyright 2002-2024
Designer’s Guide Consulting, Inc.
Designer’s Guide
® is a registered trademark of
Designer’s Guide Consulting, Inc.
All rights reserved.
Send comments or questions to
editor@designers-guide.org
. Consider
submitting
a paper or model.