The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Apr 25th, 2024, 9:09am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › General › Comments and Suggestions › Changing timeout for writing messages
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Changing timeout for writing messages (Read 3461 times)
sheldon
Community Fellow
*****
Offline



Posts: 751
Changing timeout for writing messages
Jan 06th, 2006, 3:59pm  
Ken,

 Is there anyway for a user to reset the timeout for
refreshing messages? Sometimes when composing long
messages, the screen refreshes and the entire message
gets lost. The workaround is to preview the message
regularly but sometimes I forget.

                                             Best Regards,

                                               Sheldon
Back to top
 
 
View Profile   IP Logged
Forum Administrator
YaBB Administrator
*****
Offline



Posts: 145
Re: Changing timeout for writing messages
Reply #1 - Jan 9th, 2006, 11:53am  
I have removed the automatic refresh feature. Unfortunately, there is no way to distinguish between the main page and the message compose page, so removing it from the compose page also removes it from the main page. You will now have to manually refresh the main page if you have been away for a while to see the updates.

-Ken
Back to top
 
 
View Profile WWW   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.