The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Jul 20th, 2024, 10:25am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Simulators › Circuit Simulators › "stb" analysis for differential loops
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
"stb" analysis for differential loops (Read 2157 times)
Cri Azzolini
Community Member
***
Offline



Posts: 48
University of Parma, Italy
"stb" analysis for differential loops
Feb 08th, 2006, 12:19am  
Hi,

I have recently appreciated the "stb" analysis for common feedback loops. I am wondering if the same "stb" can be applied to differential loops as well, i.e. for evaluate the transfer function of a fully differential OTA.
Does anybody tried "stb" in this case? Are there any issues to be aware of ?

Thanks,
Cri
Back to top
 
 
View Profile WWW cri.azzolini   IP Logged
Andrew Beckett
Senior Fellow
******
Offline

Life, don't talk to
me about Life...

Posts: 1742
Bracknell, UK
Re: "stb" analysis for differential loops
Reply #1 - Feb 8th, 2006, 5:17am  
Ah, I just made a post about this. Rather than repeating it, here's the reference:
http://www.designers-guide.org/Forum/YaBB.pl?num=1139361213

Regards,

Andrew.
Back to top
 
 
View Profile WWW   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.