Designer’s Guide Community :: Forum

Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.

May 2^nd, 2024, 7:32pm

	HomeHelpSearchLoginRegisterPM to admin

The Designer's Guide Community Forum › Other CAD Tools › Entry Tools › LVS Parameters for Presistors, Sources, etc.

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

LVS Parameters for Presistors, Sources, etc. (Read 6063 times)

keplin New Member Offline Posts: 8 SF Bay Area	LVS Parameters for Presistors, Sources, etc. Aug 05^th, 2006, 10:52am Does anyone know what additional LVS Parameters are needed besides "lvsIgnore" in the CDF for the following devices to be included in schematics and still be LVS clean? 1) Presistor - Shorted in Layout 2) Presistor - Open in Layout 3) vdc - Shorted in Layout 4) idc - Open in Layout
Back to top	IP Logged

keplin New Member Offline Posts: 8 SF Bay Area	Re: LVS Parameters for Presistors, Sources, etc. Reply #1 - Aug 5^th, 2006, 11:57am Oh, I found the parameter "lxRemoveDevice" which takes the string argument of either "short(PLUS MINUS)" or "open(PLUS MINUS)" This property should be used in conjunction with "lvsIgnore" These parameters should be added to CDF of the device. The details are covered in SourceLink topic #11027954
Back to top	IP Logged

bernd Senior Member Offline Posts: 229 Munich/Germany	Re: LVS Parameters for Presistors, Sources, etc. Reply #2 - Aug 7^th, 2006, 12:37am About which LVS tool do you talk? Bernd
Back to top	Just another lonesome cad guy IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.