The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
May 13th, 2024, 2:51am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Simulators › Circuit Simulators › I want to probe all nodes in one sub circuit
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
I want to probe all nodes in one sub circuit (Read 2250 times)
ywguo
Community Fellow
*****
Offline



Posts: 943
Shanghai, PRC
I want to probe all nodes in one sub circuit
Dec 19th, 2006, 8:49pm  
Hi, guys,

I want to probe all nodes in one specified sub circuit. As well known, sometimes the file size is too huge if all nodes are recorded in *.tr* file. Can you tell me any SPICE option related to it?

Thanks
Yawei
Back to top
 
 
View Profile   IP Logged
Geoffrey_Coram
Senior Fellow
******
Offline



Posts: 1998
Massachusetts, USA
Re: I want to probe all nodes in one sub circuit
Reply #1 - Dec 20th, 2006, 4:41am  
I think .options probe tells some spice-like simulators to only put into the .tr0 file those things that were requested with .print
Back to top
 
 
If at first you do succeed, STOP, raise your standards, and stop wasting your time.
View Profile WWW   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.