The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Jul 21st, 2024, 9:24pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Simulators › Circuit Simulators › PSP model in spectre
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
PSP model in spectre (Read 1991 times)
Aigneryu
Senior Member
****
Offline



Posts: 102
PSP model in spectre
May 04th, 2007, 4:11pm  
Hi,

When I use PSP model, I found that it will never give me breakdown warning even I biased the transistor at breakdown voltage, for example 2kV. Is this true for spectre while simulating with PSP model? Is there anybody having experiences with PSP model? The version I use for spectre is 6.1.1 11/20/2006.



Sincerely,
Back to top
 
 
View Profile   IP Logged
Geoffrey_Coram
Senior Fellow
******
Offline



Posts: 1999
Massachusetts, USA
Re: PSP model in spectre
Reply #1 - May 7th, 2007, 4:24am  
I don't think the breakdown warning is part of the "standard" PSP (nor BSIM3/4); it must be something that Cadence adds to the source code.  They may not have added it yet to PSP.
Back to top
 
 
If at first you do succeed, STOP, raise your standards, and stop wasting your time.
View Profile WWW   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.