Forum
Forum
Verilog-AMS
Analysis
Modeling
Design
Theory
Welcome, Guest. Please
Login
or
Register.
Please follow the Forum
guidelines
.
Aug 15
th
, 2024, 11:24am
Home
Help
Search
Login
Register
PM to admin
The Designer's Guide Community Forum
›
Design Languages
›
Verilog-AMS
› How to make accumulator module use verilog-A?
‹
Previous topic
|
Next topic
›
Pages: 1
How to make accumulator module use verilog-A? (Read 3789 times)
icsoul
Junior Member
Offline
Posts: 29
How to make accumulator module use verilog-A?
May 11
th
, 2007, 1:18am
Note: not verilog-AMS
Thanks for your help!!
Back to top
IP Logged
makelo
Community Member
Offline
Posts: 34
Hillsboro, OR
Re: How to make accumulator module use verilog-A?
Reply #1 -
May 22
nd
, 2007, 2:23pm
You could build it up from the primitives given as examples in the modeling section. There are plenty of VerilogA and, or, nands, and dff there. This might be a good place to start.
Back to top
IP Logged
icsoul
Junior Member
Offline
Posts: 29
Re: How to make accumulator module use verilog-A?
Reply #2 -
May 25
th
, 2007, 2:38am
Than you for your advice!
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent Posts
» 10 most recent Topics
Design
- RF Design
- Analog Design
- Mixed-Signal Design
- High-Speed I/O Design
- High-Power Design
- Mixed-Technology Design
Analog Verification
- Analog Functional Verification
- Analog Performance Verification
Measurements
- RF Measurements
- Phase Noise and Jitter Measurements
- Other Measurements
Modeling
- Semiconductor Devices
- Passive Devices
- Behavioral Models
- Transmission Lines and Other Distributed Devices
Design Languages
»» Verilog-AMS
- VHDL-AMS
Simulators
- Circuit Simulators
- RF Simulators
- AMS Simulators
- Timing Simulators
- System Simulators
- Logic Simulators
Other CAD Tools
- Entry Tools
- Physical Verification, Extraction and Analysis
- Unmet Needs in Analog CAD
General
- Tech Talk
- News
- Comments and Suggestions
- Opportunities
« Home
‹ Board
The Designer's Guide Community Forum
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.
Copyright 2002-2024
Designer’s Guide Consulting, Inc.
Designer’s Guide
® is a registered trademark of
Designer’s Guide Consulting, Inc.
All rights reserved.
Send comments or questions to
editor@designers-guide.org
. Consider
submitting
a paper or model.