The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Jul 20th, 2024, 10:14am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Simulators › Circuit Simulators › Threshold Voltage calculation in Eldo
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Threshold Voltage calculation in Eldo (Read 2032 times)
Mooraka
Junior Member
**
Offline



Posts: 20
Lexington, KY
Threshold Voltage calculation in Eldo
Nov 27th, 2007, 9:22pm  
Hi,
I am trying to extract Vt of MOSFET using eldo. I could not get correct value of Vt using the functions maxgmvt, lv9. Does any one has suggestions on how to extract max-gm based Vt using Eldo?

Thanks
AD
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.