Forum
Forum
Verilog-AMS
Analysis
Modeling
Design
Theory
Welcome, Guest. Please
Login
or
Register.
Please follow the Forum
guidelines
.
Jul 17
th
, 2024, 12:26am
Home
Help
Search
Login
Register
PM to admin
The Designer's Guide Community Forum
›
Design Languages
›
Verilog-AMS
› PLL code in Verilog A lib
‹
Previous topic
|
Next topic
›
Pages: 1
PLL code in Verilog A lib (Read 4712 times)
tuyettrinh
New Member
Offline
Posts: 3
PLL code in Verilog A lib
Apr 08
th
, 2008, 2:28pm
Hi there,
There are all PLL's components in Verilog A lib (pfd_cp, vco, fd). Have anyone tried to make a PLL schematic and run it yet ? If yes, please tell me what the testbench would be. Thank you.
Back to top
IP Logged
Marq Kole
Senior Member
Offline
Hmmm. That's
weird...
Posts: 122
Eindhoven, The Netherlands
Re: PLL code in Verilog A lib
Reply #1 -
Apr 10
th
, 2008, 11:47pm
Hi,
I'm not sure what you're looking for - do you want to know how to construct a PLL from the components? Or are your looking for tests for a complete PLL to verifiy that it functions?
Marq
Back to top
IP Logged
tuyettrinh
New Member
Offline
Posts: 3
Re: PLL code in Verilog A lib
Reply #2 -
Apr 12
th
, 2008, 9:21pm
Hi Marq,
I want the testbench to test a complete PLL system. I'd like to verify if the PLL is function. Thanks.
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent Posts
» 10 most recent Topics
Design
- RF Design
- Analog Design
- Mixed-Signal Design
- High-Speed I/O Design
- High-Power Design
- Mixed-Technology Design
Analog Verification
- Analog Functional Verification
- Analog Performance Verification
Measurements
- RF Measurements
- Phase Noise and Jitter Measurements
- Other Measurements
Modeling
- Semiconductor Devices
- Passive Devices
- Behavioral Models
- Transmission Lines and Other Distributed Devices
Design Languages
»» Verilog-AMS
- VHDL-AMS
Simulators
- Circuit Simulators
- RF Simulators
- AMS Simulators
- Timing Simulators
- System Simulators
- Logic Simulators
Other CAD Tools
- Entry Tools
- Physical Verification, Extraction and Analysis
- Unmet Needs in Analog CAD
General
- Tech Talk
- News
- Comments and Suggestions
- Opportunities
« Home
‹ Board
The Designer's Guide Community Forum
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.
Copyright 2002-2024
Designer’s Guide Consulting, Inc.
Designer’s Guide
® is a registered trademark of
Designer’s Guide Consulting, Inc.
All rights reserved.
Send comments or questions to
editor@designers-guide.org
. Consider
submitting
a paper or model.