madsoup
New Member
Offline
Posts: 4
|
i'm trying to directly measure in spice where the currents entering the terminals of a transistor flow. specifically, i want to be able to differentiate between currents charging capacitances and other.
the path i'm heading down is breaking apart one of the verilog-a transistor models, making a standalone verilog module for each of its current sources and then wiring them up in a schematic. this way i can descend into the transistor and probe internal branches.
i've been eyeing the models at SIMUCAD, and i also have the "official" EKV2.6 model from the EKV guys.
good idea, bad idea, general thoughts?
thanks
|