The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Jul 16th, 2024, 11:30pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Simulators › Circuit Simulators › default model library in ADE
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
default model library in ADE (Read 1940 times)
analogue_guy
Community Member
***
Offline



Posts: 38
default model library in ADE
Apr 03rd, 2009, 2:05pm  
Hi,

Do you know how can I set the default model library in ADE? Or which setting option or whatever does it depend?

cheers,
Back to top
 
 
View Profile   IP Logged
oermens
Community Member
***
Offline



Posts: 86
Re: default model library in ADE
Reply #1 - Apr 3rd, 2009, 3:57pm  
add/modify your .cdsenv with the following:

spectre.envOpts  modelFiles   string  "/path_to_your_model_file/model_file.scs"
spectre.envOpts  includePath  string "/path_to_your_model_file/"
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.