Designer’s Guide Community

‹ Previous topic | Next topic ›

Pages: 1

Save time starting from the end of an old simulation (Read 2081 times)

MarcoC

Junior Member

Offline

Posts: 20
Cesena, Italy

Save time starting from the end of an old simulation
Sep 17^th, 2009, 5:17am

Hi everybody,
I have a pressing problem. I've just done a transient simulation of about 120us using Virtuoso Analog Design Environmet and it taked about 3 hours.
Unfortunately the results are not stable �:'( , I would simulate other 100us, I mean I have to restart a new simulation of 250us instead 120us. But this will take too much time.
Is there any way to start the simulation from 120us daving my time? �:-/

Thank you for uoyr help

IP Logged

MarcoC Junior Member Offline Posts: 20 Cesena, Italy	Re: Save time starting from the end of an old simulation Reply #1 - Sep 17^th, 2009, 7:18am Hi guys, don't matter. I've solved my problem asking more time to my project manager . For the moderator: if you wish you can delete this topic. Sorry for these stupid posts but I was in panic. �:P Bye
Back to top	IP Logged

ywguo Community Fellow Offline Posts: 943 Shanghai, PRC	Re: Save time starting from the end of an old simulation Reply #2 - Sep 17^th, 2009, 10:30pm Hi MarcoC, It's good news to have more time. Please go to http://www.designers-guide.org/Forum/YaBB.pl?num=1217396043/3#3 and http://www.designers-guide.org/Forum/YaBB.pl?num=1186585475/2#2 Best Regards, Yawei
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›