Designer’s Guide Community :: Forum

Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.

Jul 21^st, 2024, 10:20pm

	HomeHelpSearchLoginRegisterPM to admin

The Designer's Guide Community Forum › Simulators › Circuit Simulators › IC5141 Problem

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

IC5141 Problem (Read 2002 times)

elvan New Member Offline Posts: 2	IC5141 Problem Oct 05^th, 2009, 7:27am I can not load the simulation setup states which have been saved ,suchs as Analysis , Codition Setup .... Coud anyone know the solution
Back to top	IP Logged

Geoffrey_Coram Senior Fellow Offline Posts: 1999 Massachusetts, USA	Re: IC5141 Problem Reply #1 - Oct 5^th, 2009, 1:23pm You haven't given us much to work with ... how are you trying to load them? How were they saved? What error message do you get?
Back to top	If at first you do succeed, STOP, raise your standards, and stop wasting your time. IP Logged

Riad KACED Community Member Offline Posts: 93 Swindon, UK	Re: IC5141 Problem Reply #2 - Oct 5^th, 2009, 2:43pm Besides, It's good telling us which version of IC5141 you are using. I'm not suspecting any bug, just in case ... You can get your versions by typing the following UNIX commands from a terminal where you have already acquired IC5141: UNIX> icfb -V UNIX> icfb -W Cheers, Riad.
Back to top	Riad KACED PDK, EDA Support Engineer. IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.