The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Jan 17th, 2025, 3:35am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › Mixed-Technology Design › Offset levels for GaAs hall plates?
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Offset levels for GaAs hall plates? (Read 4455 times)
HdrChopper
Community Fellow
*****
Offline



Posts: 493
Offset levels for GaAs hall plates?
Oct 21st, 2009, 8:29pm  
I'm looking for ballpark figures on the offset levels a GaAs hall element (4 contacts) might show as a function of the applied voltage/current.

Any references/comments are highly appreciated.

Best
Back to top
 
 
Keep it simple
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2025 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.