The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Jul 17th, 2024, 6:23am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design Languages › Verilog-AMS › Does can i declare CDF Parameter as global parameter
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Does can i declare CDF Parameter as global parameter (Read 1823 times)
somisetty
Community Member
***
Offline



Posts: 64
Does can i declare CDF Parameter as global parameter
Nov 09th, 2009, 2:35am  
Hi all,
Does can i declare CDF Parameter as global parameter for top module in spectre. If yes, how is it?

Thanks in advance
Back to top
 
 
View Profile   IP Logged
Riad KACED
Community Member
***
Offline



Posts: 93
Swindon, UK
Re: Does can i declare CDF Parameter as global parameter
Reply #1 - Nov 9th, 2009, 11:39am  
Hi,

Your question is not clear at all !
Can you say what you want to do ?
Please move your question to a more appropriate forum as what you are asking for has nothing to do with Verilog-AMS.

Cheers,
Riad.
Back to top
 
 
Riad KACED
PDK, EDA Support Engineer.
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.