Designer’s Guide Community :: Forum

Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.

Jul 20^th, 2024, 6:29am

	HomeHelpSearchLoginRegisterPM to admin

The Designer's Guide Community Forum › Simulators › Circuit Simulators › ADE doesn't netlist voltage sources

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

ADE doesn't netlist voltage sources (Read 2027 times)

nand_cos New Member Offline Posts: 1	ADE doesn't netlist voltage sources Mar 22^nd, 2010, 11:21pm I am having this weird issue of ADE not netlisting voltage sources. All the components and cells of the technology library are in place, but there are no instance statements for voltage sources. What could be the issue? Where do I start the debug?
Back to top	IP Logged

Geoffrey_Coram Senior Fellow Offline Posts: 1999 Massachusetts, USA	Re: ADE doesn't netlist voltage sources Reply #1 - Mar 23^rd, 2010, 9:55am I'd start by looking very closely at the log file. Also check if there are multiple libraries that have voltage source symbols in them; maybe you picked the "wrong" library.
Back to top	If at first you do succeed, STOP, raise your standards, and stop wasting your time. IP Logged

Andrew Beckett Senior Fellow Offline Life, don't talk to me about Life... Posts: 1742 Bracknell, UK	Re: ADE doesn't netlist voltage sources Reply #2 - Mar 27^th, 2010, 10:05am Wonder whether it might be a failure to set "setenv CDS_Netlisting_Mode Analog" before starting icfb/virtuoso. However, that would normally just cause parameters to be missing, not the complete instance. As Geoffrey said, check for any errors in the CIW. Regards, Andrew.
Back to top	IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.