The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Apr 26th, 2024, 6:04am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › High-Power Design › Synchornous Buck converter with pulse width modulation for DCM mode...
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Synchornous Buck converter with pulse width modulation for DCM mode... (Read 3757 times)
somisetty
Community Member
***
Offline



Posts: 64
Synchornous Buck converter with pulse width modulation for DCM mode...
Apr 06th, 2010, 7:26am  
Hi All,

is it possible to design  Synchornous Buck converter with pulse width modulation for DCM mode...?

Thanks
Back to top
 
 
View Profile   IP Logged
ggyy
New Member
*
Offline



Posts: 1
CHINA
Re: Synchornous Buck converter with pulse width modulation for DCM mode...
Reply #1 - Dec 20th, 2010, 6:31pm  
of course, zero current detect circuit should be used to realize DCM mode in synchornous converter.
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.