Designer’s Guide Community :: Forum

Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.

Jul 19^th, 2024, 3:29am

	HomeHelpSearchLoginRegisterPM to admin

The Designer's Guide Community Forum › Simulators › Circuit Simulators › transient analysis stops at 10u

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

transient analysis stops at 10u (Read 773 times)

sharkies New Member Offline Posts: 3	transient analysis stops at 10u Jul 15^th, 2010, 5:06pm Hi.. I'm running a transient analysis while strobing. The problem is, when I run for 25us, I only get 10us of data when I plot What's happening here? When I turn off the strobing, it seems to give me 25us.. I'm left in the dark here
Back to top	IP Logged

boe Community Fellow Offline Posts: 615	Re: transient analysis stops at 10u Reply #1 - Jul 16^th, 2010, 6:11am sharkies, please provide more information (cf. Forum guidelines http://www.designers-guide.org/Forum/guidelines.html). BOE
Back to top	IP Logged

oermens Community Member Offline Posts: 86	Re: transient analysis stops at 10u Reply #2 - Jul 16^th, 2010, 10:17am Perhaps you've hit the 2GB result file limit in IC5141 (I'm assuming you're using Cadence tools)? Refer here: http://www.designers-guide.org/Forum/YaBB.pl?num=1278069552/2#2
Back to top	IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.