The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Jul 17th, 2024, 3:30pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Simulators › Circuit Simulators › noisy resistors in PSS
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
noisy resistors in PSS (Read 2043 times)
vp1953
Senior Member
****
Offline



Posts: 172
noisy resistors in PSS
Oct 03rd, 2010, 12:16pm  
I was wondering if we set resistor parameter "isnoisy" to yes and run a PSS analysis in Cadence spectre, does the resistor end up generating noise or is this parameter completely ignored in PSS?
Back to top
 
 
View Profile   IP Logged
Ken Kundert
Global Moderator
*****
Offline



Posts: 2386
Silicon Valley
Re: noisy resistors in PSS
Reply #1 - Oct 3rd, 2010, 2:22pm  
The noise would be accounted for in a subsequent PNoise analysis, not in the PSS analysis itself.

-Ken
Back to top
 
 
View Profile WWW   IP Logged
vp1953
Senior Member
****
Offline



Posts: 172
Re: noisy resistors in PSS
Reply #2 - Oct 3rd, 2010, 5:19pm  
Hi Ken,

Thank you very much!
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.