The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Jul 29th, 2024, 1:22pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Simulators › Circuit Simulators › how to build an ideal PTAT voltage source in cadence?
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
how to build an ideal PTAT voltage source in cadence? (Read 2059 times)
nus_lin
Community Member
***
Offline



Posts: 48
how to build an ideal PTAT voltage source in cadence?
Jan 15th, 2011, 6:44pm  
i mean, normally a voltage source is set by the "dc voltage" entry in the property manu. i am just wondering if this 'dc voltage" controllable by temperature?

i tried to set "dc voltage"="temp", but the system take "temp" as just an undefined variable.
Back to top
 
 
View Profile   IP Logged
Ken Kundert
Global Moderator
*****
Offline



Posts: 2386
Silicon Valley
Re: how to build an ideal PTAT voltage source in cadence?
Reply #1 - Jan 15th, 2011, 11:46pm  
try setting tc1 on the vsource.
Back to top
 
 
View Profile WWW   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.