altaj
Junior Member
![* *](https://designers-guide.org/forum/Templates/Forum/default/starblue.gif)
Offline
Posts: 11
|
After hammering away all day with a novice's knowledge of verilog-A, I have a great sense of accomplishment at getting my modules to work, and match the transistor circuits very well.
My question: Is there a way to simplify the following lines from my code?
@(cross(V(rb) - vth, -1)) count=0; @(cross(V(rb) - vth, -1)) n=0;
Can they be combined so that there is only one "@(cross(V(rb) - vth, -1))" to service both "=0's"? Thanks, John
|