The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
May 15th, 2024, 2:49pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Simulators › Circuit Simulators › connect by name in Spectre netlist
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
connect by name in Spectre netlist (Read 2505 times)
XY-oriented
Junior Member
**
Offline



Posts: 23
connect by name in Spectre netlist
Jun 16th, 2011, 4:14am  
Hi,
is there a way to tell Spectre netlister to connect modules with names and not by order ? Eldo offer this possibility so I guess Spectre does too....

thanks for helping Wink
Back to top
 
 
View Profile   IP Logged
ywguo
Community Fellow
*****
Offline



Posts: 943
Shanghai, PRC
Re: connect by name in Spectre netlist
Reply #1 - Jun 17th, 2011, 7:26am  
No, Spectre netlister does not connect nodes to instance ports with names.

Yawei
Back to top
 
 
View Profile   IP Logged
boe
Community Fellow
*****
Offline



Posts: 615
Re: connect by name in Spectre netlist
Reply #2 - Jun 17th, 2011, 7:34am  
XY-oriented wrote on Jun 16th, 2011, 4:14am:
... Eldo offer this possibility so I guess Spectre does too....
I didn't find this feature in the Spectre documentation.

B O E
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.