The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Jul 17th, 2024, 3:27pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design Languages › Verilog-AMS › Listing 29 Skin Effect module Verilog-AMS book page 93 1st Edition
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Listing 29 Skin Effect module Verilog-AMS book page 93 1st Edition (Read 2424 times)
Marcelo Baru
New Member
*
Offline



Posts: 7
Listing 29 Skin Effect module Verilog-AMS book page 93 1st Edition
Sep 23rd, 2011, 11:59am  
Quick question:

1) Shouldn't it read real zeros[0:lumps-1]... instead of zeros[0:2*lumps-1]?
2) And shouldn't the for be i < lumps/2 instead of i < lumps?

Thanks,
Marcelo
Back to top
 
 
View Profile   IP Logged
Ken Kundert
Global Moderator
*****
Offline



Posts: 2386
Silicon Valley
Re: Listing 29 Skin Effect module Verilog-AMS book page 93 1st Edition
Reply #1 - Oct 28th, 2011, 7:08pm  
Marcelo,
    I don't think so. Remember that both the zeros and poles arrays contains two numbers for every zero and pole, the real and imaginary parts of the zero/pole frequencies.

-Ken
Back to top
 
 
View Profile WWW   IP Logged
Marcelo Baru
New Member
*
Offline



Posts: 7
Re: Listing 29 Skin Effect module Verilog-AMS book page 93 1st Edition
Reply #2 - Oct 28th, 2011, 10:06pm  
You're correct Ken. Second paragraph on page 94 explains it.

Cheers,
Marcelo
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.